mandag 25. juli 2016

Princess Mononoke

I love Studio Ghibli, but had yet to cosplay from one of the movies. And as I love strong female characters I chose to make San from Princess Mononoke, but a slightly older version. As I started to redesign my version I came over the beautiful art nouveau concept by Hannah Alexander. So I took alot of inspiration from her artwork while still keeping a few of my own ideas.




The Mask
In the movie San changes between whole mask to a half mask after getting shot. My choice ended on the half mask. A black worbla and foam base was stretched over a sryrofoam head to create the shape. 


Several details were added using more worbla. And the entire mask was primed with wood glue. The ears were built hollow and out of worbla as well. All pieces were primed and spraypainted red.

With acrylic paint I added more and more details to make it come to live :) A little airbrush was used as well. 

The earrings and detailed paint job was directly inspired from Hannah Alexanders design. 

The Hood And cape
San uses a full fur over her shoulders. As I'm quite tall I thought that would make me look a little bulky and square, so I went for a fur hood and a linen cape with fur trimming. I used fun fur for this, as it is cheap and airbrushed it to get a more interesting look. 

For the cape I made a wolf emblem on the back. 

The Appliqué was made from a daker furniture fabric with all the lines added by sewing machine. The double lines were made using a twin needle on my sewing machine. It gave a nice raised 3d effect to the fabric. It is attached to the cape using close zig zag stitch. 




The dresses
The dark blue underdress was sewn in a stretch jersey fabric with a princess cut pattern. 

The overlaying white dress are simply two lined pieces of fabric draped to hang from the pauldrons. Leather strips were used as a belt. 

The Pauldrons
The idea of adding pauldring came from Hannah Alexanders design, but I wanted a wolf deaign rather than a boar. 

First I sculpted a wolfs head out of clay, then I stretched black worbla over it. I took out most of the clay to reduce weight, but left some in the extremeties (tip of nose and ears). 

Then I stadily added more layers and details and a gold paint job. 





The jewellery
For the necklace I sculpted the teeth out of polymorh and alternated the design with wooden beads. 

The blue necklace is also made from Polymorph, but I embedded a blue LED and a battery to it, so it would glow. 


The spear and knife
These were first drawn in vector style and then laser cut. Two layers were glued together and sanded down. 



The final look
Conwant Cosplay and Art just released these two stunning photos of me and my sister as the Forest God. 

søndag 10. juli 2016

Junkrat mine style birthday cake

My sister love all things nerdy and she's planning a Junkrat cosplay in the future :D

Therefore I decided to decorate her birthday cake as Junkrats mine. Happy birthday to the best sister in the world. 


And as a bonus, here's a look back to when she got Play of the Game as Junkrat during the Overwatch All Stars event in June <3



fredag 1. juli 2016

Mercy Cosplay from Overwatch

I have written about how I made the costume before, but now I have so many great photos to show you. For tutorials see here: wings, staff and the rest
Photo and edit by Katrix Media Site

 Photo and edit by Katrix Media Site

Photo and edit by Katrix Media Site

Photo by Danarki Photography, edit by Jellycide

Photo and edit by Katrix Media Site

Photo and edit by Katrix Media Site

Photo and edit by Kyman Cheng for the CSPLY.eu project

Photo and edit by Kyman Cheng for the CSPLY.eu project

Photo and edit by Kyman Cheng for the CSPLY.eu project

Hope you liked these, now I'm going to play a little more competetive mode, safe to say I have played as Mercy the most... by a landslide. 

mandag 27. juni 2016

Alice from Madness Returns - Misstiched dress

There is something fascinating with the dark world of Alice madness returns and I can't deny that I love all the dresses from this game. But to manage to make even one I need to focus on just one, so here's how I made the Misstiched dress from the doll house world. 
Concept art from official art book (Spicy Horse)

Another reason to make this was to get a costume to pose together with my Vorpal blade (commissioned from Stickweed). 

The bodice
The base for the bodice is sewn with a Burda pattern I had laying around, using a cotton fabric with iron on interfacing and a zipper in the back. Zipper was supposed to be invisible, but something is wrong with my invisible zipper foot, oh well. 



Finding a peach colored fabric with turquoise stripes proved to be a challenge. So my plan would be to sew each stripe on by hand. I have seen other people do this, and from looking at other peoples work I made a few conclusions. 

- From the ref photo it looks like there's some shine to the stripes meaning satin ribbon would be perfect according to this. Problem here is that every tiny tiny wrinkle will be very visible when sewn to the bodice, and the satin ribbon will not reflect light well in photos. 
- I have seen sewing senpai J.Hart Design use french gimp braid for the stripes, this will get a more luxurious feel and more texture. Problem I found was that finding the right color was not so easy from Norway, and the stripes ended up being very thin. 

Here's my cotton bias tape, satin ribbon and french gimp braid. 


My solution ended up being bias tape, great width, folded edges, no shine (at least from the ones I chose) and a wide variety of colors. 



The poofy sleeves were made from altering the sleeve pattern to a poofy pattern, I found this tutorial here.


My sleeves needed stripes and a pink frilly edge. 

Sewn to a hoop and gathered to fit my arm in one end. 

Testing the shape by pinning the sleeve to my bodice. 

The pink frills on the sleeves are polka dotted in the ref photo, and I ended up using rhinestones to get a more interesting texture. These are hot fix stones, which means that there's embedded glue into them which activates when heated. And instead of buying a "hot fix want" I use my soldering iron to heat them up. (I still need some practice, ended up with a few burns on my fabric :S 

I also need a collar with same blue stripes (only going in two directions)




I made two of these and sewed them onto the neckline of the bodice. Then they were under stitched to lay better. A hook was sewn into the nape by hand. 


All that is left is detailing, adding over sized decorative stitches, ripping the sleeve and weather it :D


Last thing I added was the buttons in front. These are hand painted wooden buttons. The color is a little off in this photo due to the light. 

Buttons are sewed on with pink satin ribbon

The over skirt and apron
I found the perfect pattern for the tartan over skirt. This was sewn as a circle skirt. More info on how to sew a circle skirt here. 
And I found this perfect fabric

The apron was sewn from two pieces of white canvas with iron in interfacing. lace and white bias tape was sewn to the edges. 


Then the entire piece was dyed using tea :D And the pockets were sewn from the same fabric as the skirt and bow. The symbols are made from foam to get a crisp edge. 


The entire apron is sewed onto the pink waistband. The waist band has a zipper in the back and is then attached to the tartan skirt. 


A test on laying on the floor

And one where my sister is modelling it for me. 

The bow and hollow yves
To ensure I would always have the perfect bow I made it as a separate piece together with the dolls head (Hollow Yves). The doll mask was made by molding paper clay and then using this as a mold for worbla. I used black worbla this time for get the surface as smooth as possible. 

Then with acrylic paint I painted the detailes. 





The underskirt and crinoline
The pink underskirt was also sewn as a circle skirt. I then sewed on a folded strip of the same fabric in folds along the edge. 

To prevent the bodice to slip up I sewed the underskrit to it. 

To get the big volume for the skirt I used a petti coat and a crinoline. I had a huge crinoline from my Morrigan dress, but it was floor lenght. So to save some money I sewed in ribbons on the inside of the crioline to I could bind it up to be knee lenght when I need to. 

The gloves
I actually had a pair of old stockings with the right colored stripes. 

So I just transformed these into gloves by pinning down finger tubes. 


And lastly I added the pink frills. 


The pink frills of the gloves also needed polka dots, bring on the hot fix rhinestones to match the sleeves. ^_^

The necklace
Having access to a lasercutter makes thing much easier. The omega for the necklace was cut out of MDF and sanded down, then primed and painted. 


Makeup
I will make a makeup video tutorial later, because I ended up being really happy with how this makeup turned out :D

Now we just wait for amazing photos from the photoshoots <3